在使用多槽式超聲波清洗機時，若想實現更理想的清洗潔凈度，可從以下幾個關鍵方面著手：

When using a multi slot ultrasonic cleaning machine, if you want to achieve a more ideal cleaning cleanliness, you can start from the following key aspects:

一、選用高品質純水

1、 Select high-quality pure water

多槽式超聲波清洗機作業時，對電導率和電阻有特定要求，而水質純度直接影響這兩項指標。因此，為顯著提升清洗效果，務必確保外接純凈水達到規定純度。使用高品質的純水，能為清洗過程創造良好條件，助力提高清洗的潔凈程度。

When operating a multi slot ultrasonic cleaning machine, there are specific requirements for conductivity and resistance, and the purity of water quality directly affects these two indicators. Therefore, in order to significantly improve the cleaning effect, it is necessary to ensure that the external purified water reaches the specified purity. Using high-quality pure water can create favorable conditions for the cleaning process and help improve the cleanliness of the cleaning process.

二、合理選擇頻率

2、 Reasonably choose frequency

多槽式超聲波清洗機借助超聲波發出的頻率，使清洗液產生空化效應，進而加速溶解和剝離被清洗工件上的灰塵、油脂等污垢。不同的清洗需求，適配不同頻率的超聲波：

The multi slot ultrasonic cleaning machine uses the frequency of ultrasonic waves to generate cavitation effect in the cleaning solution, thereby accelerating the dissolution and peeling of dust, grease and other dirt on the cleaned workpiece. Adapt to different frequencies of ultrasonic waves for different cleaning needs:

當使用水或水清洗劑時，由空化作用主導的物理清洗力，更適宜搭配低頻超聲波。

When using water or water cleaning agents, the physical cleaning force dominated by cavitation is more suitable for pairing with low-frequency ultrasound.

針對小間隙、狹縫、深孔等特殊結構的零件，高頻超聲波能展現出更為出色的清洗效果。

High frequency ultrasonic waves can demonstrate better cleaning effects for parts with special structures such as small gaps, narrow slits, and deep holes.

三、控制清洗液劑量

3、 Control the dosage of cleaning solution

通常情況下，清洗液液面高于振動子表面一米以上較為適宜。多槽式超聲波清洗機受駐波場影響，波節處振幅極小，波幅處振幅較大。為規避清洗不均勻的問題，一方面要精準控制清洗液劑量，另一方面需將清洗物品放置在波幅處，以此實現更佳的清洗效果。

Normally, it is more suitable for the cleaning solution level to be higher than one meter above the surface of the vibrator. The multi slot ultrasonic cleaning machine is affected by the standing wave field, with extremely small amplitudes at the nodes and large amplitudes at the amplitudes. To avoid the problem of uneven cleaning, on the one hand, it is necessary to accurately control the amount of cleaning solution, and on the other hand, place the cleaning items at the wave amplitude to achieve better cleaning effect.

通過以上方法，可有效提高多槽式超聲波清洗機的清洗潔凈度。值得注意的是，不同型號的超聲波清洗機存在一定差異。在實際應用中，務必嚴格按照操作說明書進行清洗操作，確保清洗機穩定、高效運行，達到最佳清洗效果

By using the above methods, the cleaning cleanliness of the multi slot ultrasonic cleaning machine can be effectively improved. It is worth noting that there are certain differences among different models of ultrasonic cleaning machines. In practical applications, it is necessary to strictly follow the operating instructions for cleaning operations to ensure the stable and efficient operation of the cleaning machine and achieve the best cleaning effect

本文由多槽手動超聲波清洗機友情奉獻.更多有關的知識請點擊:http://m.kszqc.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message